Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

FTP CODE 2010

ANNEX 1 | FIRE TEST PROCEDURES

PART 1 | NON-COMBUSTIBLE TEST

 

1. APPLICATION

1.1 Where a material is required to be non-combustible, it shall be determined in accordance with this part.

1.2 If a material passes the test as specified in paragraph 3, it shall be considered as “non-combustible” even if it consists of a mixture of inorganic and organic substances.

 

2. FIRE TEST PROCEDURES

The non-combustibility shall be verified in accordance with the test procedure in the appendix to this part (ISO 1182). However, the test exposure need not exceed 30 min duration.

 

3. ACCEPTANCE CRITERIA OF NON-COMBUSTIBILITY

Materials to be classified as non-combustible shall satisfy the following criteria:

1. the average furnace thermocouple temperature rise as calculated in paragraphs 8.4 and 8.5 of the appendix does not exceed 30°C;

2. the average specimen surface thermocouple temperature rise as calculated in paragraphs 8.4 and 8.5 of the appendix does not exceed 30°C;

3. the average duration of sustained flaming as calculated in paragraph 8.3 of the appendix does not exceed 10 s; and

4. the average mass loss as calculated in paragraph 8.2 of the appendix does not exceed 50%.

 

4. TEST REPORT

The test report shall include the information in paragraph 9 of the appendix and classification of the material according to the test criteria specified in paragraph 3 above.

 

5. REFERENCE DOCUMENT

ISO 1182, Reaction to fire tests for building and transport products – Non-combustibility test.

 

Read More: FTP CODE 1996

« »
Share this Post!

About the Author : Admin


Send a Comment

Your email address will not be published.

Pin It on Pinterest

Share This

Share this post with your friends!